CAD2Lathe

Home
Contact

Welcome to our web site!

It starts with a CAD drawing then Ends with a Gcode file, that can be run in your machine controller and the best is its low price. We use Mach 3 Turn to verify the Gcode and to machine the part or Microtech's Free CNC Simulator.
Make Pens, Chess set or any profile you come up with. We give full support to get you started. CAD help too!
New Version has Mach3, EMC2 and its own DXF Writer. This will help in creating a Profile to input into CAD.
Using only AutoCad, Turbocad, Qcad, IntelliCad2000, CMS IntelliCad and the Free Version of DraftSight to draw the part, then converting the drawing to Polylines. Saving as AutoCad version 11/12 ASCII (.dxf file).
Programs runs on Windows XP, Vista, 7 thru 10
If you have a differant CAD program no listed , just Email your DXF. We will look it over and let you know if it's OK to use.
 
CAD2Lathe and LatheOps are part of CAD2Gcode Apps.
Cad2Lathe requires a CAD Program.
LatheOps is direct to G-code programming.
Operations in Sequence is direct to G-code programming.
 

THIS IS HOW IT WORKS
howitworks1.jpg

Thanks to Westley Chagnon for this wellmade Video and all his instructional Video's.

latheshape.jpg

This is a Profile used the CAD Arrray command
king.jpg

handle.jpg

click here to download below picture's Gcode file

Back to CAD2Gcode Apps